Nuga NM-5000P, User Manual

Page: 11 / 24

How to Assemble the Product Frame
NM-­5000P
How to Assemble the Product Frame
Screw No. 4
Screw No. 7
Screw No. 8
Screw No.16
Screw No.16
Connect frame legs to a
handle cover
Arrange 2 pieces of frame legs, 1
piece of pipe connector and 1 piece of
handle cover as shown in the picture.
Fix the handle cover with 3 pieces of
Screw No. 4 as shown in the picture.
Connect a molding frame
with floral pattern
Insert the frame leg, assembled in
the previous step, onto a piece of a
molding frame with floral pattern.
Fix a molding frame with no
pattern
Cover a molding frame with no
pattern and fix it with 5 pieces of
Screw No. 8 as shown in the picture.
Fix the assembled frame leg with 2
pieces of Screw No. 7.
Fix the main base frame
Fix the main base frame with 4
pieces of Screw No. 16 to the
assembled frame leg as shown in the
picture.
Insert both the center
support and leg support
Insert a piece of center support into
the assembled molding frame with
no pattern as shown in the picture.
Fix 2 pieces of leg supports with 2
pieces of Screw No. 13 to the assembled
frame leg as shown in the picture.
Fix the assembled frame leg
Put the assembled frame leg on the main
assembly as shown in the picture, and
then put on the center support exactly to
the hole on the molding frame.
Fix the assembled frame leg with 4
pieces of Screw No. 16 as shown in
the picture, and then fix the center
support with 2 pieces of Screw No. 12.
Fit a foot cover respectively into the end of
a frame leg.
Repeat the above steps to assemble one
more frame leg.
Insert 2 pieces of hole covers to the outside of
the assembled molding frame with floral pattern.
Screw No.13
Screw No.12
ⴘ
ⴙ
ⴙ
ⴘ
ⴙ
Leg support
Center support
Hole cover