NUANCE OMNIPAGE PRO 9, User Manual

Page: 78 / 114

Customizing Zones
70 Chapter 5
To remove a row or column divider from a table zone:
1 Click the Remove Row or Column Dividers button.
2 Place the mouse pointer within the table zone where you want
to remove a row or column.
The mouse pointer becomes a small “
x
” with a dimmed bar.
3 Position the bar on the divider you want to remove and click
the mouse button. Ctrl-clicking a column divider will remove
only the column divider from a single cell. To remove a row
divider, the whole row divider must be removed.
The selected divider disappears.
To remove all row or column dividers from a table zone:
1 Click the Remove/Replace All Row and Column Dividers
button.
2 Place the mouse pointer within the table image zone.
The mouse pointer becomes a large “
X
”.
3 Click the mouse button.
The internal row and column dividers disappear, and the
mouse pointer changes to a grid. Clicking the mouse button
again restores all the rows and column dividers to the
originally drawn positions.
If you are dissatisfied with a change you have made to a table divider,
you can cancel your last alteration with the Undo command, Ctrl-Z.
Additionally, you can insert a set of row and column dividers in a table
zone by clicking the Remove/Replace All Row and Column Dividers
button and then clicking in the table zone. This works only if your have
previously used the Remove/Replace All Rows and Columns tool on
the zone.