NuAire LabGard ES NU-543-300S, Operation And Maintenance Manual

Page: 24 / 72

OM0239 Page 24 of 72
April 2021
6.1.5 Run Mode
Any time the blower run key (password used, i.e. blower-hidden-blower as default) is pressed with the sliding
window at its correct operational height, the RUN MODE screen will appear. The Run Mode will start with a warm-
up countdown from 3 minutes. During the warm up period the aseptic cleaning process may begin. If the sliding
window is raised an audible and visual alarm will occur, but may be silenced by pressing the alarm silence key.
Airflow readings will not be displayed during the warm-up period.
Once the warm-up period is complete, airflow readings and all system functions will operate and be displayed.
The top line will show the items being displayed along with the time of day. The center of the display will show the
values of the items, the unit of measure and the temperature. The bottom of the display or message area will
show active alarms and other status information. The right hand side of the display will show a gauge depicting
the velocity limits and setpoint with an arrow indicating the current velocity reading.
Status menus of filter life and auto timer s may also be accessed in run mode. Press either ↑ or ↓ keys to move
from one menu to the next. Auto timer menu will only indicate active timers as they count down.
Warming Up 12:00
3:00
Downflow Inflow 12:00
24.0
⁰
.30 .53
mls
Message Area
Auto Timers (hh.mm) 12:00
Ultraviolet Light 0:03:12
Fluorescent Light 5:48:32
Outlet Power 5:48:34
Filter Life
0 25 50 75 100