NTT docomo PRIME L-04A, User Manual, Page: 69 / 211

66
Voice/Videophone Calls
Reconnect alarm
Setting an Alarm until
Connection is Reestablished
You can set an alarm that keeps sounding until a voice or
videophone call is reconnected when the call was
disconnected due to weak signals.
a
M
[Menu] X (Settings) X "Call/VT/
Dialing" X "Call feature" X "Reconnect alarm"
X Select an Alarm
Alarm OFF ： Set not to sound an alarm.
Low alarm ： Set to low alarm.
High alarm ： Set to high alarm.
Noise reduction
Reducing Surrounding Noise to
Make Voice Clear
Noise reduction suppresses background noises. The other
party can hear your voice clearer even in a noisy place.
a
M
[Menu] X (Settings) X "Call/VT/Dialing" X
"Call feature" X "Noise reduction" X "ON"/"OFF"
ON ： Activate Noise reduction.
OFF ： Deactivate Noise reduction.
Receiving a Call/Videophone Call
a
An incoming call arrives
The ring tone sounds.
•
P
: Place the call
on hold.→P70
b
During a
videophone call
•
C
[Image]:
Answer the call
using the
substitute image.
b
A
or
I
[Answer]
Answer the call.
•
C
[Spk ON/Spk OFF]: Toggle Hands-free ON or OFF.
• Pressing a dial key/
*
/
#
during a call allows you to
send touch-tone signals.
b
During a videophone call
•
I
[Image/Camera]: Switch the image to send
between the alternate image and the camera image.
•
A
: Switch between the Inner and Outer camera for
the image to send to the other party.
c
To terminate the call,
P
Note
•
Available duration for reconnection varies depending on the
status of usage and signal.
• If the signal suddenly worsens, the call may be disconnected
without the alarm sounding.
• The billed airtime will continue during the reconnection attempt.
• If the call is disconnected, the other party will hear nothing.
Voice call
incoming call screen
Videophone call
incoming call screen
W_s†l†WZ†wovU”GGwˆŽŒG]]GG~Œ‹•Œš‹ˆ SGvŠ›–‰Œ™GYYSGYWW_GG`a\`Ght