NTT docomo PRIME L-04A, User Manual, Page: 43 / 211

40
Before Using the Handset
Inserting
When inserting the UIM, close the FOMA terminal and hold it with both hands.
Removing
When removing the UIM, close the FOMA terminal and hold
it with both hands.
Security Codes
You can set 2 security codes to the UIM: "PIN1 code" and
"PIN2 code".→P111
a
Hold the edge of the UIM tray and draw it in the
direction of
a
, and insert it in the direction of
b
with the IC chip side of the UIM down
b
Insert the tray in the direction of the arrow until it is fixed
Note
• Do not use excessive force when inserting the UIM to avoid
damaging it.
a
Hold the edge of the UIM tray and draw it until it
stops, and hold the UIM up softly and remove the
UIM in the direction of the arrow
Note
• Do not misplace the removed UIM.
W_s†l†WY†ilmU”GGwˆŽŒG[WGG~Œ‹•Œš‹ˆ SGvŠ›–‰Œ™GYYSGYWW_GG`a\\Ght