
121
Security Settings
[Pay phone]
Set an option for calls made from payphones.
•
Set items and operations are the same as in "User unset".
[Not support]
Set an option for calls which Caller ID cannot be sent such as calls
made from overseas or from a fixed line phone via forwarding services.
(Caller ID may be sent depending on the carrier.)
•
Set items and operations are the same as in "User unset".
c
I
[Done]
Set mute ring(sec.)
Muting Ring Tone for a Caller
Unset in Phonebook
You can set the FOMA terminal not to ring immediately
when a call arrives from a caller not saved to the
Phonebook or without Caller ID. This prevents nuisance
calls such as "one-ring call" that are disconnected after a
short ringing time.
a
M
[Menu]
X
(Settings)
X
"Sounds&Vibration"
X
"Set mute ring(sec.)"
b
Perform the following operations
•
C
[List]: List of items is displayed.
[Set mute ring time]
Set whether to enable the Set mute ring time.
[Mute time]
*
Set the time for which the ring tone is muted before the ringing action
starts between 1 and 99 seconds.
[Missed call logs]
*
Set whether to display the Received call logs for the call that was
terminated in the time specified in "Mute time".
* Can be set when "Set mute ring time" is set to "ON".
c
I
[Done]
Note
•
If an anonymous call set to "Reject call" arrives while the
Anonymous caller is activated, the call is not indicated and
appears on the Stand-by display. The call is recorded in
Received call log as a missed call. The other party hears a busy
signal. Calls are rejected even when the Voice mail or Call
forwarding service is activated. However, if Ringing time is set
to 0 second or the FOMA terminal is out of service area or
turned off, network services are activated.
•
i-mode or SMS messages are received regardless of the
rejection settings.
•
If a movie/i-motion movie with video/sound is set to "Select ring
tone" (P94), "Call display" (P101), and the relevant voice/
videophone call arrives, the playback of movie/i-motion movie
takes priority over this setting even when "Alert setting" is
selected and incoming call screen or ring tone is set to
"Terminal setting".
•
If a movie/i-motion movie with video/sound is set as either the
ring tone or Incoming call screen in "Terminal setting", the same
movie is set to the other item.
<User unset>
•
If the Caller ID request service is activated, it takes priority over
the settings of "Anonymous caller". The caller hears the voice
guidance for a Caller ID request.
Continued on next page
W_slW]zljUGGwGXYXGG~ SGvGYYSGYWW_GGXWaW\Ght