164
Compose SMS Screen Sub Menu
a
Compose SMS screen (P163)
X
M
[Menu]
X
Perform the following operations
[Send]
Send SMS.
[Save]
Save SMS being created or edited as an unsent message.
[Report request]
Set whether to request an SMS report when SMS is delivered.→P165
[Validity period]
Set the period of time that a sent SMS can be kept undelivered at the
SMS center.→P165
Receive SMS
Automatically Receiving SMS
Messages
When the FOMA terminal is in service area, SMS is
automatically received.
•
Up to 1,000 received SMS messages including i-mode mail
can be saved. However, the savable number depends on the
amount of the data.
a
When SMS is received
appears at the top
of the screen
When the reception is completed, the
Receive results screen appears.
•
The previous screen returns if no
operation is performed for approximately
30 seconds.
•
Selecting "SMS" opens the Inbox list
screen.
•
Until the detail screen of received SMS
opens,
appears at the top of the
screen and
(the number indicates
the number of messages) appears in
Stand-by.
Note
•
For a destination of an international carrier other than
DOCOMO, enter in the order of "+" (Press
0
for 1+ seconds),
"Country Code", and "other party's mobile phone number". For
the mobile phone number, skip the leading "0", if any. Numbers
may be entered in the order of "010", "Country Code", and the
"other party's mobile phone number" (to reply to overseas SMS
received, enter "010").
•
Characters may not be sent correctly to the other party
depending on the signal strength.
•
When you send an SMS to a receiver who uses an international
carrier and some of the characters you send are not supported
by the carrier, those characters may not be displayed correctly.
•
Even if you set "Caller ID notification" to "Not notify", your Caller
ID is sent to the other party.
•
You cannot reply to SMS sent with Unknown ID or from a public
phone.
•
When sending SMS, "Pictographs" and "Pictograph idioms"
other than
and
are displayed as half-pitch space in
receiver's screen.
•
SMS texts in Korean sent to a terminal which does not support
Korean will not be displayed properly on the terminal.
Receive results
screen
W_slW^thpUGGwGX][GG~ SGvGYYSGYWW_GGXWaW^Ght