a
Connect the microUSB connector
of USB connection cable L02 to the
microUSB connection terminal of the
terminal
•
Insert the microUSB connector horizontally with
the surface with the USB mark facing up.
microUSB connector
(with USB mark
facing up)
USB
connector
microUSB connection
terminal
b
Connect the USB connector of USB
connection cable L02 to the USB port of
PC
•
The terminal is recognized automatically by PC.
•
Request for installation of the device driver may
appear on your PC. If it appears, cancel it.
•
is displayed in the status bar.
•
The "USB connection mode" screen appears on
the terminal.
If the "USB connection mode" screen does not
appear, drag or swipe the status bar down
to open the Notification panel, and then tap
"Charge only", "Mass storage", "PC sync", or
"USB tethering".
•
The following operations are available from the
"USB connection mode" screen.
Charge only
Select this to charge only.
(P39)
Mass
storage
Select this to synchronize
music with Windows Media
Player on a PC and transfer
data between PC and the
terminal by dragging and
dropping. (P131)
PC sync
Select this to sync your
contacts and calendars.
USB
tethering
Select this to use USB
tethering. (P119)
c
"Charge only" / "Mass storage" / "PC
sync" / "USB tethering"
u
"OK"
139
File Management
