power level, the actual SAR level of the phone
while operating can be well below the maximum
value. This is because the phone is designed to
operate at multiple power levels so as to use
only the power required to reach the network. In
general, the closer you are to a wireless base
station antenna, the lower the output.
Before a phone model is available for sale
to the public, it must be tested and certified
to the FCC that it does not exceed the limit
established by the U.S. government-adopted
requirement for safe exposure. The tests
are performed on position and locations (for
example, at the ear and worn on the body) as
required by FCC for each model. The highest
SAR value for this model phone as reported to
the FCC when tested for use at the ear is 0.46
W/kg, and when worn on the body is 0.64 W/kg.
(Body-worn measurements differ among phone
models, depending upon available accessories
and FCC requirements).
While there may be differences between the
SAR levels of various phones and at various
positions, they all meet the U.S. government
requirement.
The FCC has granted an Equipment
Authorization for this model phone with all
reported SAR levels evaluated as in compliance
with the FCC RF exposure guidelines. SAR
information on this model phone is on file with
the FCC and can be found under the Display
Grant section at http://transition.fcc.gov/oet/
ea/fccid/ after search on FCC ID ZNFL06D.
For body worn operation, this phone has
been tested and meets the FCC RF exposure
guidelines when used with an accessory
designated for this product or when used with
an accessory that contains no metal and that
positions the handset a minimum of 1.0 cm
from the body.
*
In the United States, the SAR limit for
wireless mobile phones used by the
public is 1.6 watts/kg (W/kg) averaged
over one gram of tissue. SAR values may
vary depending upon national reporting
requirements and the network band.
265
Appendix / Index
