NTT docomo FOMA SO703i, Manual

Page: 333 / 351

8
7
Put a checkmark for [ 最適化を行う ] and click [ 次へ ].
 If you have performed the optimization already, the
window for optimization does not appear.
8
Check the setting information and click [
完了
].
9
Click [OK].

When you performed the optimization in step 7, the
window for confirming whether to restart the PC appears.
Click [
はい ].
When Using Other Providers
1
Start the FOMA PC setup software and click [ かん
たん設定 ].
2
Select [ パケット通信 ] for the connection type and
click [ 次へ ].
3
Select [ その他 ] for the host and click [ 次へ ].
4
Click [OK].
The host (APN) is loaded from the FOMA terminal. Wait for
a few moments.
5
Enter a host name (any name) at [ 接続名 ].
 You cannot enter half-width characters, “¥” “/” “:” “ ＊ ” “?”
“<” “>” “|” “”” and “!”.

Select [PPP 接続 ] for the connection type. [IP 接続 ] is not
available.

About whether you should notify your caller ID, follow the
instruction of the provider you use.
6
Click [ 接続先 (APN) 設定 ].
7
Click [ 追加 ] and set a host (APN) and click [OK].
Set 2 or a number between 4 and 10 for cid.
8
Click [OK].
9
Click [ 次へ ].
10
Select a choice of accessible users, set [ ユーザー
名 ] and [ パスワード ], and click [ 次へ ].
To set [ ユーザー名 ] and [ パスワード ], enter the various
information supplied by your provider accurately, in
particular, uppercase and lowercase letters.
11
Put a checkmark for [ 最適化を行う ] and click [ 次へ ].
 If you have performed the optimization already, the
window for optimization does not appear.
12
Check the setting information and click [ 完了 ].
13
Click [OK].

When you performed the optimization in step 11,
the window for confirming whether to restart the PC
appears. Click [
はい ].
Easy Setup (64K Data Communication)
When Using “mopera U” or “mopera”
1
Start the FOMA PC setup software and click [ かん
たん設定
].
2
Select [64K
データ通信
] and click [
次へ
].
3
Select [
『
mopera U
』への接続
] or [
『
mopera
』への接
続 ] and click [ 次へ ].
4
Click [ はい ].
The host (APN) is loaded from the FOMA terminal. Wait for
a few moments.