NTT docomo FOMA SO703i, Manual

Page: 297 / 351

295
Appendix/External Device Interface/Troubleshooting
Replay period has expired

This file is provided with an expiry
date or a term limitation for play-
back. It cannot be played back
because the term permitted for
playback has expired. Check the
expiry date in the Detail info dis-
play (P.220).
Replay period has not yet started

This file is provided with a term
limitation for playback. It cannot
be played back because the term
permitted for playback has not yet
started. Check the starting date of
the term in the Detail info display
(P.220).
Requested software unavailable

Failed to start the i- α ppli software
stored in the FOMA terminal from
a site or mail, or by infrared com-
munication.
Retention period has expired (492)

The time for storage of the pull-
type file attachment has expired.
It cannot be obtained.
Root certificate has expired. Connect?

The certificate of the FOMA termi-
nal is not yet valid or has expired.
Select [Yes] to connect or [No] to
cancel to connect. This message
may also appear when the current
date and time are set wrong. Set
them correctly (P.40).
Root certificate is not valid

The SSL list is set to [Invalid]. Set
the SSL list to [Valid] (P.162).
Run software and delete data on IC
card. Then delete software

Failed to delete the Osaifu-Keitai-
compatible i- α ppli software
because of some data being
contained in the IC card. Delete
the saved data after starting the
software and then retry the opera-
tion (P.198).
S
Same ToruCa exists. Unable to
receive ToruCa

You cannot obtain a ToruCa card
that already exists when the
Duplication check is set (P.202).
Server is busy

The software update is not avail-
able because the server is busy.
Wait for a while and then retry the
operation (P.300).
Server is full (551)
 When the number of mail held for
the recipient at the i-mode center
reaches the maximum number,
no more mail sent to the recipient
is accepted by the i-mode center.
Try to send mail after the recipient
makes space for new mail at the
i-mode center (P.175).
Service is used by the previous
software. Unable to download.
Delete a service?

Downloading/upgrading is un-
available because software us-
ing the same service has been
already downloaded.
Service not provided

SMS is not provided.
Service not registered

You do not have a subscription
for the i-mode service. To use
i-mode, subscribe to i-mode.

If you signed up for i-mode after
starting to use the FOMA terminal,
power off the FOMA terminal once
and then power it on again.
Setting self mode

The Self mode is set. Cancel the
Self mode and then retry the op-
eration (P.122).
Setting unknown reject

The Reject unknown is set.
Cancel the Reject unknown and
then retry the operation (P.128).
Software already updated

No update is available for the
i- α ppli software because it has
been already updated to the latest.
Software terminated due to security
error

The i- α ppli software was termi-
nated since it has attempted an
unauthorized operation. Check
the security error history (P.196).
SSL session cannot be established

The SSL session failed. Connect
again.
SSL session failed
 Failed to connect to the server
because of a server authentica-
tion error.
SSL session was terminated
 The SSL communication is discon-
nected because there is a prob-
lem with the certificate of the site.
Syntax error (XXX)

Failed to display because of an
error in the received data.
T
Text volume exceeds. Cannot send

The number of characters in the
mail main body has exceeded
the limit and mail cannot be sent.
Reduce the number of characters.
This certificate has expired. Connect?

The certificate of the site is not yet
valid or has expired. Select [Yes]
to connect or [No] to cancel to
connect.
This certificate is not valid for this
URL. Connect?
 The CN-Name (server name) of
the certificate of the site does not
match the actual server name.
Select [Yes] to connect or [No] to
cancel to connect.
This data can no longer be replayed

This file is provided with a limita-
tion on the number of times of
playback. It cannot be played
back because the number of
times permitted for playback
has been exceeded. Check the
permitted number of times in the
Detail info display (P.220).
This data may not be replayed

You may not be able to play back this
i-motion data because it is invalid.
This function is unavailable

The function you selected cannot be
used concurrently with the function
that is currently executed (P.238).
Continued