NTT docomo FOMA SO703i, Manual, Page: 233 / 351

231
Playing Music
■ For inquiries on SonicStage
Sony Ericsson Mobile Communications Japan, Inc.
Customer Support Center
Navidial: 0570-00-2516
(Can be called anywhere in Japan with the same call charge
as for the area call)
From mobile phones and PHSs: 0466-31-2516
Operation hours: 10:00 − 18:00 (Weekday)
10:00 − 17:00 (Saturday, Sunday, and public
holidays)
From home page: http://www.SonyEricsson.co.jp/so703i/
sonicstage_help/

Check the number you call and dial it correctly.
1
Set the supplied CD-ROM in the PC.
The “FOMA SO703i CD-ROM” window appears.

When you set the supplied CD-ROM in the PC, a
warning window as shown below may appear. This
warning appears because of the security setting on the
Internet Explorer, however, causing no problem for use.
Click [
はい
].
※ The window example assumes that Windows XP is
used as an operating system. The actual window
that appears may differ depending on your PC
environment.
2
Click [ エンターテイメントツール ].
3
Click [ インストール ] and double-click [ SetupSS].
The “SonicStage 4.2 Installer” window appears.
4
Click [ 次へ ], check the data in accordance with the
display messages, and install SonicStage.
After the installation is completed, be sure to restart the
PC.
 Installation may take 20 to 30 minutes depending on the
operating environment of the PC to be used.
●
When you start SonicStage for the first time, the initial
configuration window appears. Operate as instructed on
the window. For details about the format and bit rate, see
P.230.
● When you set the supplied CD-ROM in the PC and if the
“FOMA SO703i CD-ROM” window does not appear, click
[
スタート ] → [ ファイル名を指定して実行 ] , e n t e r “ C D -
ROM ドライブ名 ¥SonicStage¥SetupSS.exe” at “ 名前 ”, and
click [OK]. Check the data according to the displayed
messages, and install SonicStage.
Importing Music Data to a PC Using
SonicStage
You can use SonicStage to import music data from a
music CD to a PC. The imported music data is saved in
マイ ライブラリ of SonicStage and can be managed
in it.
3
6
5
4
Example: Importing a music CD using a PC running Windows XP
1
C l i c k [
スタート
]
→
[
すべてのプログラム
]
→
[SonicStage] → [SonicStage].
When Windows 2000 is used
Click [ スタート ] → [ プログラム ] → [SonicStage] →
[SonicStage].
SonicStage starts.
2
Set a music CD in the PC.
3
Move the pointer to [ 音楽を取り込む ] and click [CD
を録音する ].
The list of music data contained in the music CD appears.
4
Check that the tracks you want to record are
checked with “
”.
When there are tracks you do not want to record
Click “ ” to change it to “ ”.
5
Click [ ] and set the format and bit rate.
6
Click [ ].
The recording starts.
When the recording of a track is completed, the message
“
録音済み ” is displayed for the track under the heading of
“ 録音状態 ”.
To stop recording
Click [ ].
Continued