P
ROGRAMMING
FUNCTIONS
G-46 MDB
32
National Rejectors, Inc. GmbH, Buxtehude
Pay out security stock (0401)
The security stock defines the number of coins not to be paid out for each
tube. Usually, the default is 3. For critical coins the set value can also be
higher (see section "Setting the security stock per tube (Pro 26)" in this
chapter).
Using the fourth place from the right-hand side in function Pro 0404 you can
set the changer so that also the security stock is paid out:
Pro 0401
00000000
Security stock can be paid out with DISPENSE (1),
Security stock cannot be paid out (0)
Accept only tube coins when filling the tubes (0404)
Use function Pro 0404 to set, whether only those coins are to be accepted,
which are sorted into tubes or all coin types programmed, while filling the
tubes. In the first case cash coins would be rejected.
Set the first place from the right-hand side:
Pro 0404
00000000
Only accept tube coins while filling the tubes (1),
also accept cash coins (0)
Concerning function Ser 05, the cash-box does not need to be
emptied before filling the tubes with setting "1".
