Intended use
This Thermo / S600 door should be integrated
into the access range for persons, to ensure a
safe passage of goods and vehicles whether or
not accompanied by people in both industrial,
business and residential environments. The
scope of this door is determined by
EN 13241
.
Operation of the Thermo / S600 door
The door is opened by rolling the door panel
upwards (see chapter 8). An electric drive drives
the shaft. Both sides of the door panel have
columns that guide the door panel.
Improper use
•
Never place objects against the door panel
or against the top roller.
•
Never attach any components to the door
panel which could increase its weight.
•
Never use the door as a hoist.
•
Never open and close the door using any other
switches than those fitted for that purpose.
Warranty conditions
Novoferm conditions, filed at the Chamber of
Commerce under no. 06067599. Version 1.1
dated November 20, 2014.
3
4
1. Introduction
Introduction - Read this first!
Read this user manual thoroughly before using
your Thermo / S600 door. Correct use of the
door will increase your safety and result in a
long useful service life and lower service costs.
This user manual describes the use of a door
that has been installed and configured by an au-
thorised dealer or a suitably qualified engineer.
Your Thermo / S600 door has been designed
and produced in accordance with the ISO-9001
quality system standards. An electrically powered
door can only be commissioned after it has been
issued with a Certificate of Conformity (CE marking
affixed).
As from 1 July 2013 a declaration of performance
in accordance with EU Regulation No. 305/2011
Annex III (the construction products regulation)
must be handed to users as a separate document.
This manual is intended for the day-to-day user
of the door and must be kept in the immediate
vicinity of the door.
•
Instruct all users on how to operate the
Speedroller door.
•
Do not allow third parties (e.g. visitors) to
operate the door.
The manufacturer accepts no responsibility for
damage and/or injury as a result of failing to
follow the instructions in this manual.
The product may only be modified or expanded
by the supplier.
2
When commissioning the door, the qualified
expert must check for potential hazards and
satisfy himself that the door is functioning
properly and can be operated by hand.
(EN 12604 and EN 12453).
Warning
+++ W++ W++ W++
• The area of application of this Speedroller
door is set out in EN 13241.
• The installation, repair, maintenance
and dismantling of the door must be
carried out by a qualified expert, in
accordance with EN 12635
Important!
+ IMP++ IMP++ IMP
EN
3
This installation manual must be handed to the customer and must be kept in a safe place throughout the whole period of use!
Summary of Contents for Thermo S600
Page 25: ......
