Novell GROUPWISE 7 - MESSAGE TRANSFERT AGENT, Manual

Page: 91 / 97

Using MTA Startup Switches 693
no
vd
ocx (
e
n)
1
1
Decemb
er
2
007
44.27 /lrconn
Specifies the maximum number of simultaneously connected Remote client users the MTA can
accept. The default is 25. See
Section 41.2.2, “Enabling Live Remote,” on page 629 .
See also /liveremote and /lrwaitdata .
44.28 /lrwaitdata
Specifies the number of seconds you want the MTA to wait for a response from the PO before
timing out for users in Remote mode. The default is 5 minutes. See
Section 41.2.2, “Enabling Live
Remote,” on page 629 .
See also /liveremote and /lrconn .
44.29 /maxidlerouters
Specifies the maximum number of idle router threads the MTA can keep running. The default is 16;
valid values range from 1 to 16. See
Section 43.3, “Optimizing the Routing Queue,” on page 680 .
See also /maxrouters .
44.30 /maxrouters
Specifies the maximum number of router threads the MTA can start. The default is 16; valid values
range from 1 to 16. See
Section 43.3, “Optimizing the Routing Queue,” on page 680 .
NetWare MTA Linux MTA Windows MTA
Syntax: /lrconn- number --lrconn number /lrconn- number
Example: /lrconn-50 --lrconn 75 /lrconn-100
NetWare MTA Linux MTA Windows MTA
Syntax: /lrwaitdata- number --lrwaitdata number /lrwaitdata- number
Example: /lrwaitdata-7 --lrwaitdata-10 /lrwaitdata-12
NetWare MTA Linux MTA Windows MTA
Syntax: /maxidlerouters- threads --maxidlerouters threads /maxidlerouters- threads
Example: /maxidlerouters-5 --maxidlerouters 10 /maxidlerouters-12
NetWare MTA Linux MTA Windows MTA
Syntax: /maxrouters- threads --maxrouters threads /maxrouters- threads
Example: /maxrouters-10 --maxrouters 12 /maxrouters-14