636
GroupWise 7 Administration Guide
no
vd
ocx (
e
n)
1
1
Decemb
er
2
007
The contents of deselected queues are not monitored but are processed when the link opens.
10
For each selected queue, specify the maximum number of minutes a message must wait in each
queue before the link opens.
If you want the link to open immediately when a message arrives in the queue, specify 0 (zero).
11
In the
Messages
field, specify the total number of messages waiting in all selected queues that
will trigger the link to open.
12
In the
KBytes
field, specify the total size in kilobytes of all messages waiting in all selected
queues that will trigger the link to open.
13
Click
OK
to save the link profile and return to the Link Scheduling dialog box.
14
Select the new or modified link profile in the profile list.
15
Click a time slot or drag to select a range of time slots.
Time slots assigned to the selected link profile display as green.
16
Select all the time slots you want governed by the selected link profile.
17
Select a different link profile to assign to time slots.
or
Create or edit another link profile.
or
Click
OK
to save the schedule for the current link.
18
When the schedule is saved, click
OK
to close the Edit Domain Link dialog box.
19
To exit the Link Configuration Tool, click
File > Exit > Yes
.
ConsoleOne then notifies the MTA to restart using the new link schedule.
41.3.3 Using a Transfer Pull Configuration
Typically for a mapped or UNC link, the MTA for the sending domain writes (or “pushes”) message
files into the input queue subdirectories of the receiving domain. However, it is possible to change
this configuration so the MTA for the receiving domain picks up (or “pulls”) message files from the
sending domain.
The transfer pull directory is a location in the sending domain where the MTA for the receiving
domain can pick up message files (that is, “pull” them from the sending domain). It represents the
only configuration where an MTA processes messages outside its own domain directory structure.
NOTE:
The transfer pull configuration does not apply to the Linux MTA because the Linux MTA
does not use mapped or UNC links.
To set up a transfer pull configuration between domains:
1
Manually create a transfer directory with input queue subdirectories from which outgoing
message files are pulled.
7
Low priority status messages
Queue
Purpose
Summary of Contents for GROUPWISE 7 - MESSAGE TRANSFERT AGENT
Page 2: ...604 GroupWise 7 Administration Guide novdocx en 11 December 2007...
Page 10: ...612 GroupWise 7 Administration Guide novdocx en 11 December 2007...
Page 72: ...674 GroupWise 7 Administration Guide novdocx en 11 December 2007...
Page 80: ...682 GroupWise 7 Administration Guide novdocx en 11 December 2007...
