Novell GROUPWISE 7 - MESSAGE TRANSFERT AGENT, Manual

Page: 68 / 97

670 GroupWise 7 Administration Guide
no
vd
ocx (
e
n)
1
1
Decemb
er
2
007
option was not available. Now that you have set up SNMP, you can install GroupWise agent SNMP
support.
At the Windows server where you want to install the GroupWise agent SNMP support:
1 Run
setup.exe
at the root of the GroupWise 7 Administrator for NetWare/Windows CD,
then click Install Products > GroupWise Agents > Install GroupWise Agents .
or
Run
install.exe
from the agents subdirectory on the GroupWise 7 Administrator for
NetWare/Windows CD or in your software distribution directory if you have updated it with the
latest GroupWise software.
2 In the Installation Path dialog box, browse to and select the path where the agent software is
installed, then select
Install and Configure SNMP for GroupWise Agents .
3 To shorten the install time, deselect Install GroupWise Agent Software.
4
Continue through the rest of the installation process as prompted by the Agent Installation
program.
The Agent Installation program copies the SNMP support files to the agent installation
directory, makes the appropriate Windows registry entries, and restarts the Windows SNMP
service.
5 Continue with Section 42.6.2, “Copying and Compiling the MTA MIB File,” on page 670 .
42.6.2 Copying and Compiling the MTA MIB File
An SNMP-enabled MTA returns information contained in a Management Information Base (MIB).
The MIB is an ASCII data structure that defines the information gathered. It also defines the
properties that can be monitored and managed on the SNMP-enabled MTA.
Before you can monitor an SNMP-enabled MTA, you must compile the gwmta.mib file using your
SNMP management program.
1 Copy the
gwmta.mib
file from the
\agents\snmp
directory to the location required by
your SNMP management program.
ZENworks Server Management users can access the gwmta.mib file in the software
distribution directory.
2
Compile or import the
gwmta.mib
file as required by your SNMP management program.
For example, to compile the gwmta.mib file for ZENworks Server Management:
2a
In ConsoleOne, right-click the Site Server object, then click Properties > MIB Pool .
2b Click Modify Pool > Add .
2c Browse to and select the
gwmta.mib
file, then click OK .
NetWare
and
Windows: The GroupWise MIBs are located on the GroupWise 7 Administrator for NetWare/
Windows CD in the
\agents\snmp
directory or in the
software_distribution_directory \agents\snmp directory if you have
updated it with the latest GroupWise software.
Linux: The GroupWise MIBs are located on the GroupWise Administrator for Linux CD in the /
agents/snmp directory
.