Configuring the MTA
639
no
vd
ocx (
e
n)
1
1
Decemb
er
2
007
Enabling eDirectory User Synchronization
By default, eDirectory user synchronization is disabled. The MTA still performs all its other
functions, but any changes made to user information in eDirectory without the GroupWise
Administrator snap-in running will not appear in GroupWise until eDirectory user synchronization
has been performed.
Although all MTAs can be enabled to perform eDirectory user synchronization, the minimum
requirement is that at least one MTA be configured that way. If your GroupWise system spans
multiple trees, at least one MTA in each tree must be configured to perform eDirectory user
synchronization. The MTA server should have a local eDirectory replica for the MTA to access.
1
In ConsoleOne, click
Tools > GroupWise System Operations > eDirectory User
Synchronization
to display the eDirectory User Synchronization Configuration dialog box.
The eDirectory User Synchronization Configuration dialog box lists all domains in your
GroupWise system, the MTA currently assigned to provide eDirectory user synchronization for
each domain, and the current status of that agent’s ability to perform eDirectory user
synchronization.
2
Click
Configure Agents.
Only domains with NetWare MTAs or Linux MTAs should be listed, because eDirectory user
synchronization is not supported by the Windows MTA.
If domains on Windows servers are listed:
2a
Cancel out of the eDirectory user synchronization dialog boxes.
Summary of Contents for GROUPWISE 7 - MESSAGE TRANSFERT AGENT
Page 2: ...604 GroupWise 7 Administration Guide novdocx en 11 December 2007...
Page 10: ...612 GroupWise 7 Administration Guide novdocx en 11 December 2007...
Page 72: ...674 GroupWise 7 Administration Guide novdocx en 11 December 2007...
Page 80: ...682 GroupWise 7 Administration Guide novdocx en 11 December 2007...
