Novell GROUPWISE 7 - MESSAGE TRANSFERT AGENT, Manual

Page: 38 / 97

640 GroupWise 7 Administration Guide
no
vd
ocx (
e
n)
1
1
Decemb
er
2
007
2b Browse to and right-click a misconfigured MTA, then click Properties .
2c In the Platform field, select the platform where the MTA is running.
2d Click OK to save the correct platform information.
2e Return to Tools > GroupWise System Operations > eDirectory User Configuration >
Configure Agents .
3 Select the NetWare MTA that you want to perform eDirectory user synchronization.
4 If the eDirectory Access column for that NetWare displays Yes , click Enable .
or
If the
eDirectory Access column for that NetWare MTA displays No :
4a Click Set Up eDirectory Access .
4b
Browse to and select the NetWare server where the MTA runs.
4c Click OK .
The eDirectory Access column for that NetWare MTA should now display Yes so that you
can enable it.
5 Select a Linux MTA that you want to perform eDirectory user synchronization.
6 If the eDirectory Access column for that Linux MTA displays Yes , click Enable .
or
If the
eDirectory Access column for that Linux MTA displays No:
6a Click Set Up eDirectory Access .
6b In the Available LDAP Servers list, select the LDAP server that you want the MTA to log
into in order to gain access to eDirectory, then click Set Preferred .
6c In the LDAP User Name field, browse to and select the user that the MTA can use to log in
as.
The selected user must have rights to browse properties of User objects.
Click
Set Password , provide the password associated with the user selected above, then
click Set Password .
6d
Click OK to save the LDAP information.
The eDirectory Access column for that Linux MTA should now display Yes so that you can
enable it.
7 If your GroupWise system spans multiple trees, repeat Step 3 through Step 6 as needed to
enable eDirectory user synchronization for at least one MTA in each tree.
8
Click OK to return to the eDirectory User Synchronization Configuration dialog box.
Each domain for which you have configured the MTA for eDirectory user synchronization
should now display Enabled in the Status column.