SA 2100 User Guide
59
DMZ (IPv4)
If enabled, then the connected device specified as the DMZ IP address (DMZ destination) will receive all
traffic which would otherwise be blocked by the firewall. This may assist some troublesome network
applications to function properly, but the DMZ device should have its own firewall to protect itself
against malicious traffic.
DMZ checkbox
Use this to enable and disable this feature as needed. Generally, DMZ should be disabled unless really
necessary.
DMZ IP Address
Enter the IP address of the connected device you wish to become the DMZ device (DMZ destination)
into this field. You can check the IP address of each connected device on the connected devices screen.
Settings | Advanced| MAC Filter
The following figure shows the MAC Filter Settings screen. The MAC Filter feature, if turned on, will
prevent access to this network by any device which is not included in the "MAC Address Filter" list. The
filter applies to both the Wi-Fi and Ethernet interfaces, but has no effect on USB devices.
Summary of Contents for SA2100X-UG001
