Novatel SA2100X-UG001, User Manual

Page: 46 / 106

Serial Port Device
If a serial port device is currently connected and recognized, details of the device are displayed here.
Note that only 1 USB serial port device is available for remote access.
USB Serial Port Settings
These are standard serial port settings, and should be set to match the connected serial device.
Bits per second
Select the desired option. Supported speeds range from 300 bps to 115200 bps.
Data Bits
Select 7 or 8 to match your serial device.
Parity
The available options are Odd, Even, and None. Select the option to match your serial device.
Stop Bits
Select 1 or 2, as used by your serial device.
Flow Control
The available options are None, XON/XOFF, and Hardware. Select the option used by your serial device.
Settings | Device | Accelerometer
The accelerometer settings screen displays different options depending on the mode selected. The two
mode options are driver behavior and motion detection. These settings are used by the Smart Agent
software installed in the SA 2100 to generate events which are then passed to the Novatel Wireless
server. The settings on this page determine which movements trigger Accelerometer events. Reports of
these events are available on the Novatel Wireless server.
SA 2100 User Guide 42