SA 2100 User Guide
45
Threshold
This value is the G force - measured in milliG (1000th of G force) to allow precise definition - which will
trigger a motion change event. When multiple thresholds are available, it is normal practice to have a
series of thresholds at different levels.
Set Time
When the threshold above is exceeded, it must remain above the threshold value for the period
specified by the corresponding Set Time (specified in milliseconds) in order to trigger an event. If the
measured time period above the threshold is less than Set Time, the event is not triggered.
Clear Time
This is the delay, in milliseconds, before an event is cleared. Once an event is triggered, it will last until
the "Max Time" (below) is reached, or a time interval equal to Clear Time has elapsed without any
readings above the threshold. A new event cannot be triggered until the previous event has been
cleared.
Max Time
This setting, measured in seconds, determines how long a single event can last. If the above-threshold
reading persists after this time period has elapsed, a new event will be triggered.
Summary of Contents for SA2100X-UG001
