Powering the Device
When the power adapter is connected, the SA 2100 powers up automatically. It takes approximately
two minutes for the device to power up and register on the cellular network.
To power the device:
1.
Connect the device to a power source.
2.
Push the Power switch that is located in the back of the device.
To view the Power switch location, see the
Connectors
section.
3.
The device power LED lights up to indicate that it is powered on.
It may take approximately two minutes for the device to power up.
Using the Battery
To power the device using the battery:
1.
See the
Inserting a Battery
section for instructions.
2.
Push the Power switch that is located in the back of the device.
To view the Power switch location, see the
Connectors
section.
3.
The device power LED should lights up to indicate that it is powered on.
It may take approximately two minutes for the device to power up.
SA 2100 User Guide
24
Summary of Contents for SA2100X-UG001
