OEM7 Installation and Operation User Manual v4
48
Chapter 3
OEM7 Receiver Operation
Before operating the receiver for the first time, use the installation instructions in
on page 25. The following instructions are based on a configuration
similar to the following figure.
Figure 17: Basic OEM7 Receiver Connection Interfaces (example)
The figure above does not show all necessary hardware. Also see
on page 55 for a base/rover example.
The optional External Oscillator Signal option is only available on the OEM729.
The COM ports on OEM7 receiver cards are LVCMOS, except COM1 on the OEM729, and
signal conversion may be required depending on the equipment connected.
