Novatel OEM719, Installation And Operation Manual

Page: 3 / 235

OEM7 Installation and Operation User Manual v4 3
Table of Contents
Figures
Tables
Notices Receiver Card
Customer Support
Chapter 1 Introduction
1.1 Related Documents and Information 19
1.2 OEM7 Receiver Card Overview 19
1.2.1 OEM7 Family Card 20
1.2.2 Enclosure 20
1.2.3 GNSS Antenna 20
1.2.4 Power Supply 20
1.2.5 Optional External Frequency Reference 21
1.2.6 Data Communications Equipment 21
1.2.7 OEM719 Receiver Overview 21
1.2.8 OEM729 Receiver Overview 21
1.2.9 OEM7700 Receiver Overview 22
1.2.10 OEM7720 Receiver Overview 23
Chapter 2 Installation of OEM7 Family Receiver Cards
2.1 Additional Equipment Required 25
2.2 Selecting a GNSS Antenna 25
2.3 Choosing a Coaxial Cable 26
2.4 Power Supply Requirements for Receiver Cards 26
2.5 Card Installation Overview 27
2.5.1 Electrostatic Discharge (ESD) Precautions 27
2.6 Mounting the Printed Circuit Board 27
2.6.1 Planning the Mount Location 28
2.6.2 Board to Board Spacing 28
2.6.3 Mounting Options 29
2.6.4 Thermal Dissipation 32
2.6.5 OEM7720 Accessory Heat Spreader 32
2.6.6 Vibration 33
2.7 Preparing the Data, Signal and Power Interface 33
2.8 Mounting the GNSS Antenna 38
2.9 Connecting the Antenna to the Receiver Card 39
2.9.1 Antenna LNA Power 39
2.10 Applying Power to the Receiver Card 40
2.11 Connecting Data Communications Equipment 40
2.11.1 Serial Ports 40
2.11.2 USB Ports 44
2.11.3 Ethernet Ports 45
2.11.4 SPI Ports 46
2.12 Check that the Receiver is Operating 46
Chapter 3 OEM7 Receiver Operation
3.1 Communications with the Receiver 49
3.1.1 USB Communications 49