Novatel OEM719, Installation And Operation Manual

Page: 215 / 235

APPENDIX E Receiver Card Interface Examples
OEM7 Installation and Operation User Manual v4 215
The 10 kΩ pullups (R5, R6) are required if the buffers are used on the EVENT_IN lines. If the buf-
fers are not used, the OEM7 cards have built-in 10 kΩ pullup resistors – external pull resistors
are not required.
OEM719 OEM729 OEM7700 OEM7720
Connector P1701 P1802 P2001 P1901
EVENT_IN1 9
1
8 30 30
EVENT_IN2 7
2
7
3
29 29
EVENT_IN3 – – 32 32
EVENT_IN4 – – 31 31
PPS 19 4 24 24
EVENT_
OUT1/VARF
6
4
3 17 17
EVENT_OUT2 – – 26 26
EVENT_OUT3 – – 23 23
EVENT_OUT4 – – 25 25
Table 46: EVENT_IN, EVENT_OUT and PPS Pin Designation
Designator Manufacturer Manufacturer Part Number
D1 On Semiconductor MMSZ5227BT1G
D2 Comchip Technology CDBU00340
U1, U2 Fairchild Semiconductor NC7WZ241L8X
U3 Semtech SRV05-4A.TCT
Table 47: Bill of Materials (critical components)
1
This pin is multiplexed with the COM3 transmit signal and is not available if COM3 is enabled.
2
This pin is multiplexed with the CAN1 transmit signal and is not available if CAN1 is enabled.
3
This pin is multiplexed with the COM3 receive signal and is not available when COM3 is enabled. See P1802 Main
Connector 24-Pin Header on page 158 for more information.
4
This pin is multiplexed with the CAN1 receive signal and is not available if CAN1 is enabled.