36
Using the Modem Manager — Using the Terminal
Revision 1.02
90023164
To send one of these commands, tap the list to open it, then tap the desired command to select
it, as shown in Figure 59. The command will then be automatically sent to the modem.
Figure 59 The Cmd LIst Box
Entering Commands
If you need to enter AT commands other than those discussed above, you will need to use the
terminal window
command line
. The
command line
is located at the bottom of the window,
beside the
Send
button, as shown in Figure 60.
Figure 60 The Terminal Window Command Line
To use the command line, tap on the line, enter the desired AT command, and tap
Send
.
Note:
The AT command set for the Minstrel m500 is outside the scope of this document. If you
need the Minstrel m500 command set, contact Novatel Wireless Technologies Inc.
