Setting Up the Minstrel m500 — Connecting the Minstrel m500 to Your Palm
9
90023164
Revision 1.02
Connecting the Minstrel m500 to Your Palm
In order to connect the Minstrel m500 modem to your Palm m500/505™, follow the steps below:
1.
Make certain the Palm m500/505™ device is turned off.
2.
Hold the Minstrel m500 facing you in one hand (the release button should be on the left side
of the unit). With the other hand, hold the Palm m500/505™ so that the screen is facing you.
The orientation of the two units is illustrated in Figure 11.
3.
Set the Palm m500/505™ in the bottom lip of the modem so that the Palm device’s serial
connection sits over the Minstrel m500’s serial connector, as shown in Figure 11.
4.
Slide the release button up, and position the Palm m500/505™ so that it is flush with the
modem. Once the Palm m500/505™ is laying flat against the modem, let go off the release
button.
Figure 11 Connecting the Minstrel m500 Modem to the Palm m500/505™ Device
Modem’s Serial Connector