16
Configuring the Minstrel m500 — Configuration Acknowledgment
Revision 1.02
90023164
The
Setup Wizard
will then save the IP address settings and power off the modem, shown in
Figure 22, before displaying the
Auto Config
window.
Figure 22 The Disconnecting Dialog Box
Configuration Acknowledgment
Once you have finished configuring your IP addresses, the
Auto Config
window, shown in Figure
23, will appear. This window confirms that your Minstrel m500 has been configured.
Figure 23 The Auto Config Window
It may take some time for your network provider to activate your wireless IP account, and you will
be required to wait the amount of time your network provider indicates before you can proceed.
Once that time has elapsed, tap
Next
to begin checking your network registration. If, however,
you know your account has already been activated, tap
Don’t Wait
and begin checking the
network registration immediately.
