Using the Modem Manager — Enabling or Disabling Push Messaging
33
90023164
Revision 1.02
Opening the Push Message Configuration Screen
Select
Push Config
from the
Advanced
menu to open this window, as shown in Figure 54. This
will display the
Push Messaging
window, shown in Figure 53.
Figure 54 The Push Config Menu Command
Configuring Push Messaging
Essentially, there are only two settings for the
Push Messaging
function,
enabled
or
disabled
,
as shown in Figure 53. To enable push messaging, tap
Enabled
.
If the push technology is already
enabled, the
Enabled
button will be highlighted. To disable push messaging, tap
Disabled.
If the
push technology is already disabled, the
Disabled
button will be highlighted.
The new settings will automatically be saved to the modem as soon as the button is tapped. To
close the
Push Message Configuration
window, tap
Done
.
Note:
In order to access this window, the modem must have an active session.
