Novanta ATI Axia130, Manual

Page: 42 / 95

Manual, F/T Sensor, Ethernet Axia
Document #9620-05-C-Ethernet Axia-02
Pinnacle Park • 1031 Goodworth Drive • Apex, NC 27539 • Tel:+1 919.772.0115 • Fax:+1 919.772.8259 •
www.ati-ia.com
C-42
6.7
Communication Page (comm.htm)
On the Communication
page, a user may view and edit the system’s Ethernet networking options.
Usually these settings are set once when a user first setup the system and do not need to be changed later
A detailed overview of setting up Ethernet communications with the sensor is in
Section 4—Connecting
Through Ethernet .
Figure 6.8—Communications Page
The descriptions for the fields on the
Communications page, Figure 6.8 , are the following:
Ethernet Network Settings
IP Address Mode:
A user can configure the IP address of the sensor (refer to
Section 4.1—IP Address
Configuration
for Ethernet ).
Static IP Address: A user can set the static IP address (refer to Section 4.1—IP Address
Configuration
for Ethernet).
Static IP Subnet Mask:
This field is for the subnet mask portion of the IP address. Many networks use the
default 255.255.255.0. Users should contact their IT department to know what static
IP subnet mask to assign.