Maintenance Instructions
52
4. Maintenance Instructions
4.1 Technical Maintenance Procedures
Carrying out the technical maintenance specifications of the tractor is the effective way to prolong the service life
of the tractor and reduce accidents.
The technical maintenance schedule for 35XT series tractors is based on the accumulated work hours, which
includes maintenance for: every shift (per 10 work hours), every 50 work hours, every 200 work hours, every 400
work hours
，
every 800 work hours, every 1600 work hours, and winter and long-term storage.
IMPORTANT ISSUES:
1.
All maintenance should be carried out by the owner/operator or a trained service professional who is
familiar with the tractor.
2.
In order to make the tractor work properly and to prolong its service life, technical maintenance
procedures must be strictly observed during running-in and normal operation.
3.
The tractor warranty can be voided at any time should damage happen as the result of any operator who
is unfamiliar with the tractor or when specified maintenance procedures are not performed according to
manufacturer specified timelines.
4.
Opening the engine and hydraulic system safety valve, the relief valve, and the voltage regulator
are prohibited, without prior manufacturer authorization. Making adjustments to these sensitive areas
may cause damage to the tractor, and invalidate the warranty.
4.1.1 Technical Maintenance for Every Shift (every 10 hours)
1.
Remove the dust, oil, and dirt from the tractor, and clean the air filter when working under dusty
conditions.
2.
Check whether the bolts and nuts on the outside of the tractor are loose and tighten them if necessary,
especially the nuts of the front and rear wheels.
3.
Check the oil level in the engine oil pan, and fluid levels in the radiator, fuel tank, power steering
reservoir, and hydraulic lifter. Add the correct fluid to each of them when the level is low. The tractor
should be parked for at least 30 minutes on a level surface before checking the engine oil level.
4.
Grease according to Table 4-1.
5.
Check if the engine has any air, oil or water leakage, and eliminate the leakage if any exists.
6.
Check the pressure of the front and rear tires, and add air to them when necessary.
7.
Check and adjust the free play of the clutch and brake pedals.
8.
Maintain the diesel engine according to the requirements for daily maintenance described in the engine
manual.
Summary of Contents for NorTrac 35XT
Page 42: ...Operation Description 36 ...
Page 98: ...TE25 Serials TE354 L161Q1K ...
