NorthStar 6000i, Quickstart Manual And Reference Manual

Page: 69 / 184

65
Reference section 4 — Creating waypoints and routes
Creating new waypoints Reference Manual Revision D
move up or down within a waypoint list to
select individual waypoints.
When you display a waypoint list, you can
see their coordinates in any of the
following ways by pressing the
Coord
option
menu key:
•
as lat/lon coordinates
•
as distance and bearing from your
position (often the most useful way to
display coordinates, since it may be
easier to visualize “3 miles north” than
lat/lon digits)
•
as loran time differences
The small letter “S” to the right of the waypoint
name tells you that the displayed coordinates,
either lat/lon or TDs, were the ones used to
originally store the waypoint.
Creating new waypoints
There are two easy ways to create a new
waypoint:
•
numerically — by entering position
coordinates as lat/lon, loran TDs, or
distance and bearing on the
NEW
WAYPOINT
screen
•
from the chart — by pointing to the
waypoint’s location on the
CHART
screen
Assigning a name and description
To permanently store a waypoint, you
must give it a
name . The name can be from
one to six characters long, and must be
different from all the other waypoint
names stored in the
6000i . You can also
enter a description of up to 16 characters
on the line below the name.
Assigning a symbol
You can give the waypoint a symbol so
you can easily identify it on the
CHART
screen. When creating or editing
waypoints, you can choose from any one of