NorthStar 6000i, Quickstart Manual And Reference Manual

Page: 21 / 184

17
Displaying numeric data on the chart screen
Quickstart Guide Revision D
knots, use the keypad to enter the new
speed. Finally, press
ENTER
to start moving
to the demo cursor location.
To view the
CHART
screen while in demo
mode, press
Return
twice.
The word
Demo always appears on the
right side of the
CHART
screen when
you’re in demo mode.
To leave demo mode, go back to the
DEMO
CONTROL
screen as described above, and
press
Exit Demo
.
This key returns you directly to the active
CHART
screen.
Displaying numeric data on the chart screen
To display numeric information directly on
the chart screen, press the
More Info
menu
key to display an “info bar” at the bottom
of the screen. (If the
More Info
key is not
visible, press
Vessel
to restore it.)
Each additional press of the
More Info
key
shows the following information:
•
your vessel’s present
Speed-Over-Ground (
SOG
)
,
Course-Over-Ground
(COG)
, and
(optionally) heading (
HDG
)
•
your vessel’s distance (
Dist
) and bearing
(Brg)
to the current waypoint, if any,
along with a cross-track indicator
•
your vessel’s position in lat/lon (or TDs,
if you’ve enabled loran)
•
the Speed-Through-Water (
STW
), water
depth and temperature, as measured by
the optional echo sounder
Vessel lat/lon displayed on chart screen