NorthStar 6000i, Quickstart Manual And Reference Manual

Page: 168 / 184

164
Reference section 10 — Setup
Setting up radar
Northstar 6000i
4. Set the
AUX port
option to “490.”
5. Press ENTER .
6. To activate this setting, turn the 6000i off
and back on again.
Setting up radar
To use radar with the system, you must
connect the Northstar radar to the
6000i’s
Port 2 and configure the port:
To set up Port 2 for radar:
1. Press the STAR key to display the
Options/service info
screen.
2. Press
Port setup options
.
3. Press
Port 2 Setup
,
4. Press Edit .
5. Set the output format to “Radar” by using
the cursor pad up or down.
6. Press
ENTER
.
If an optional heading sensor is used, it
must be connected to the same
6000i as
the radar.
Installing software updates
You can install current software updates by
obtaining a software update cartridge from
Northstar or your local authorized North-
star dealer. Update all slave units before updating the
master unit.
1. Press the
STAR
key to display the
Options/service info
screen.
2. Press
More
.
3. On the
MORE OPTIONS/SERVICE INFO
screen, press
Software update
.
4. On the
SOFTWARE UPDATE
screen, press
Start Update
and follow any instructions
on your screen.
CAUTION!
Do not remove the card
or
turn
the unit off
while the update is in
progress or your 6000i system will
be corrupted.