NorthStar 6000i, Quickstart Manual And Reference Manual

Page: 160 / 184

156
Reference section 10 — Setup
Changing your navigation settings
Northstar 6000i
unit is turned on. To enter or change this
message, you need an access code that
Northstar sends you when you return your
product registration card. Once you’ve
received your registered-owner access
code, you can enter your owner ID
message:
1. From the Display Options menu select the
Owner’s Message option and press
Edit
.
2. Enter the access code from your Northstar
owner’s card, then press
ENTER
. The fi rst
character block of the owner’s message
fl ashes.
3. Enter your message using the keypad and
cursor pad, then press ENTER .
Your message can be changed only by
entering your access code number and
repeating the above procedure. The
6000i gives you three attempts at enter-
ing the correct access code; after that, all
operations freeze, requiring you to turn
power off, then turn it back on again to
resume functioning.
Changing your navigation settings
To access the 958’s navigation options,
press the
STAR
key until you see the
OPTIONS/SERVICE INFO
screen.
Press
Navigation options
to access the
NAVIGATION OPTIONS screen.
Navigation Options screen