29
Reference section 1 — Using the Chart Screen
Rotating the chart
Reference Manual Revision D
Browse mode
The word
BROWSE
in the upper right
corner of the screen means you are
currently using Browse mode.
In browse mode, you can use the cursor to
look at other areas of the chart, and desig-
nate points you want to navigate to.
The info bar at the bottom of the screen
displays the position coordinates of the
cursor, and the distance and bearing from
your vessel to the cursor.
Rotating the chart
Press the
Rotate
key to change the angle
of the charts displayed on the
CHART
screen. As long as you’re in vessel mode,
you can rotate the chart to any of the
following angles:
•
North-up
– No rotation.
•
Course-up
– As your vessel changes its
direction of travel, the chart rotates to
keep your COG straight up on the
screen. Course-up represents your true
COG as determined by the GPS
receiver.
The 6000i ignores any course changes if
your speed is under half a knot.
The chart reacts very slowly to turns of
less than 5°, to avoid annoying small rota-
tions.
Your COG is often different from your
vessel’s heading, so what you see
Browse mode
Summary of Contents for 6000i
