![background image](http://html.mh-extra.com/html/northern/n3nvr-series/n3nvr-series_user-manual_1708282033.webp)
Network Video Recorder
Install device
User Manual
Issue: V4.6.X(2022-04-24)
13
When replacing the hard disk, please turn off the power and then open the device to replace the
hard disk.
Please use the monitoring dedicated SATA hard disk recommended by the hard disk manufacturer.
Choose the hard disk capacity according to the recording requirements.
3.3.1
Install One or Two Hard disks
Step 1
Remove the screws for fixing the upper cover and take down the cover.
Step 2
Take out the screws and silicone cushion, pass the screws through the silicone cushion,
and secure it to the screw holes, as show in Figure 3-1..
Figure 3-1
Installing the hard disk screws
Step 3
Pass the screws through the holes on the base and put the hard disk in place, as shown in
Figure 3-2
Install hard disk
Step 4
Turn the device over, and fasten the fixing the rest 2 screws, as shown in Figure 3-3.