Northern N3NVR Series User Manual Download Page 78

Page: 78 / 218

Network Video Recorder
User Manual

UI System Setting

Issue: V4.6.X(2022-04-24)

Step 3

Set parameters.

Step 4

Click

to reset to factory settings, click

to save image settings.

----End

7.1.4

OSD Settings

Click

OSD

in the main menu or menu of the channel management screen and choose

OSD

access the OSD

screen, as shown in Figure 7-10.

Figure 7-10

OSD setting screen

Operation Steps

Step 1

Select a channel from the drop-down list of channels.

Step 2

Click

next to Time to enable or disable OSD time setting.

Step 3

Click

next to Name to enable or disable OSD channel setting.

Step 4

Set the channel name.

Step 5

In the video window, click and drag time or channel to move to a location.

Step 6

Click

and select channels, then click

to apply the OSD settings to

cameras in selected channels , click

to save OSD settings.

----End

Summary of Contents for N3NVR Series



























































































































































































































Search results

Summary of Contents for N3NVR Series

Reviews:

Brands by name

Popular brands

Northern N3NVR Series, User Manual

Search results

Summary of Contents for N3NVR Series

Reviews:

Brands by name

Popular brands