Northern N3NVR Series User Manual Download Page 102

Page: 102 / 218

Network Video Recorder
User Manual

UI System Setting

Issue: V4.6.X(2022-04-24)

Figure 7-32

Camera alarm in

Operation Steps

Step 1

Select a channel in

alarm in

Step 2

Click

to enable or disable the functions.

Step 3

Select

Alarm type

from the drop-down list.

NC:

Normal close the alarm

NO:

Normal open the alarm

Step 4

Set

name

Step 5

Enable the event actions include: push message to App, pop up message to monitor, send

Email, buzzer, FTP, PTZ, full screen, alarm out, camera alarm out, event recording and

so on.

Step 6

Click

Schedule

page to access the schedule screen. For details, please see 7.2.1 Record

Schedule Figure 7-14Step 5 Set the record schedule.

Step 7

Click

to save settings of

Alarm in

----End

Summary of Contents for N3NVR Series



























































































































































































































Search results

Summary of Contents for N3NVR Series

Reviews:

Brands by name

Popular brands

Northern N3NVR Series, User Manual

Search results

Summary of Contents for N3NVR Series

Reviews:

Brands by name

Popular brands