文件编号：
NR-TP-0715-008
版本：
1.0
- 86 -
Appendix B EMC
This product complies with EN 60601-1-2 Medical Electrical Equipment - Part 1-2: General
requirements for safety - Collateral standard electromagnetic compatibility requirements and
tests
Notes:
Using unqualified accessories, sensors and cables will increase the electromagnetic
emission and reduce the electromagnetic immunity of the device.
Do not put the device close to other devices or stack together. When necessary,
observe the device closely to ensure that it runs normally in the environment.
The device requires special EMC protection, and it is necessary to install and
maintain it in the environment that meets the following EMC information.
Even if other devices comply with CISPR emission requirements, they may also
cause interference to this device.
When the input signal amplitude is smaller than the minimum amplitude specified
in the technical specifications, it may result in inaccurate measurements.
Mobile communication devices or wireless network devices may have an impact on
the device.
Electromagnetic Emission Guidelines and Declarations
Taurus® Patient Monitor should be used in the specified electromagnetic environment. The user
should ensure that the device is used in the following electromagnetic environment.
Emission test
Compliance
Electromagnetic environment - Guide
RF emission
CISPR11
Group 1
The device uses radio frequency energy only when the
internal function is running, and thus its RF emission
is very low, and won’t cause electromagnetic
interference to nearby electronic equipment.
RF emission
CISPR11
ClassA
This device is suitable for the public low-voltage
power supply network that isn’t connected to
residence directly.
Harmonic emission
IEC 61000-3-2
ClassA
Voltage fluctuations and
flicker IEC 61000-3-3
Conform
