文件编号：
NR-TP-0715-008
版本：
1.0
- 2 -
1.1.2
Warning
Warning
This monitor is used for clinical patient monitoring, and only trained and
qualified doctors and nurses are allowed to use this monitor.
Before operating, the user must check if the device, cables and accessories are
functioning properly and safely.
The alarm volume, upper and lower alarm limit should be set according to the
actual situation of the patient. Do not just rely on audio alarm system while
monitoring the patient, because too low alarm volume or complete shutdown
may result in alarm failure and endanger the patient safety. Please pay close
attention to the actual clinical situation of the patient.
This device can only be connected to a grounded electrical outlet; if the power
outlet is not connected to the ground wire, do not use the outlet; instead, supply
power to the device with rechargeable batteries.
Do not open the enclosure in order to avoid an electric shock. Any repair and
upgrade of the monitor must be done by service personnel trained and
authorized by Northern.
When handling packaging materials, abide by local laws and regulations or
hospital waste disposal regulations. Keep the packaging materials away from
children.
Do not use this instrument at a place with inflammables such as anesthetics to
prevent explosion or fire.
Please install the power lines and cables of accessories carefully to avoid patient
entanglement or suffocation, cables tangled or electrical interference.
The devices connected to the monitor should form an equipotential body
(protective grounding effectively connected).
When the monitor is used together with electrosurgical devices, the user (a
doctor or a nurse) should ensure the safety of the patient and instrument.
The physiological wave, physiological parameters and alarm information
displayed on the monitor are only for the doctor’s reference and should not be
directly used as the basis for clinical treatment.
This is not a therapeutic unit.
