Northern Lights Fitness UG-7020, Owner'S Manual

Page: 22 / 34

21
COMPUTER OPERATION
h. “ START/PAUSE ” button: To start a workout, press the “ START/PAUSE ” button .
The console is equipped with
LEVEL CONTROL
and
WATT CONTROL
function. During
Program 12
under
PROGRAM
mode, the
WATT CONTROL
function is
available to operate.
Before operating
P12
, review the difference between the
CONSTANT POWER
and the
CONSTANT
TORQUE
function
:
Level Control (Constant Torque) Watt Control (Constant Power)
“ RPM

RESISTANCE
Unchangeable resistance even though
the value of
RPM (Rotate Per Minute)
increases or decreases under the
Constant Torque Mode
during workout.
No matter how fast you pedal, the
resistance is fixed.
Changeable resistance depends on the value of
RPM (Rotate
Per Minute.)
“ RPM

RESISTANCE

; RPM

RESISTANCE

”
In order to remain the value of
Watt Control
, the value of the
RPM (Rotate Per Minute)
increases (when you pedal faster),
while the value of the
Resistance
decrease (becomes lighter
resistance.)
On the contrary, the value of the
Resistance
would increase
(becomes heavier resistance) when the value of the
RPM
decreases (when you pedal slower.)
UNDER
PROGRAM
MODE
a. WITHOUT PULSE VALUE:
“ ” flashing symbol will appear when detecting your pulse.
b. THE WARNING BEEP SOUND EMIT CONSTANLY DURING
WORKOUT:
If your pulse is greater than the SELECTED PULSE VALUE
during workout, the short warning beep sound will constantly emit.
Please note that this is a warning for you to slow down or to
decrease the workload level.
P12 (WATT CONTROL)
UNDER
PROGRAM
MODE