18
COMPUTER OPERATION
There are three ways to enter into
PROGRAM
MODE
as below:
1. POWER OFF STATUS (LCD diagram disappear on LCD window):
a. Pedaling to activate the console.
b. The activated LCD console lights up
along with a long beep sound. LCD
diagram appears as shown on right
side:
c. Enter into the initial setting mode
after around two seconds as shown
on right side:
2. RESTART FUNCTION:
a. Press the
“
START/PAUSE
”
button to pause the current program.
c. Hold the
“
RESET
”
button for
FOUR
SECONDS
to enter into the initial setting
mode as illustration shown on the right.
c. Skip to
Step B.
of
NORMAL OPERATION
on the next page to continue the operation.
UNDER
PROGRAM
MODE
RESET
The RESET function only operates
under PAUSE MODE
.
CONTINUE TO THE NEXT PAGE
Summary of Contents for UG-7020
Page 34: ...33 PRODUCT PARTS DRAWING...
