28
S
ECTION
7
iii. Select MODE; Rest Red, Rest Green, Last Served, Nil (Fixed Time).
iv. Edit LOCKING; YELLOW LOCK or NON-LOCK.
v. Enter PASSAGE TIME.
vi. Enter FORCE MIN RECALL time (if applicable).
f. Ensure unit is set to desired CONTROL MODE (AUTO or MANUAL). See OPTIONS PAGE 1>CONTROL
MODE.
g. Select START PROGRAM (program can be started from the CHANGE TIMING screen or the HOME
screen).
7.1
L
(B
M
)
Note: The shaded areas indicate which layouts are shown as diagrams on the following pages.
Layout
Units Required
Control Mode
One-Way Zone
Primary, Secondary 1
Auto/Manual/Pilot Car
One-Way 1 Side
Primary, Secondary 1, 2
Auto
One-Way 2 Side
Primary, Secondary 1, 2, 3
Auto
One-Way 3 Side
Primary, Secondary 1, 2, 3, 4
Auto
One-Way 4 Side
Primary, Secondary 1, 2, 3, 4, 5
Auto
One-Way 5 Side
Primary, Secondary 1, 2, 3, 4, 5, 6
Auto
One-Way 6 Side
Primary, Secondary 1, 2, 3, 4, 5, 6, 7
Auto
One-Way 1 Cross Road
Primary, Secondary 1, 2, 3
Auto
One-Way 1 Cross 1 Side
Primary, Secondary 1, 2, 3, 4
Auto
One-Way 1 Cross 2 Side
Primary, Secondary 1, 2, 3, 4, 5
Auto
One-Way 2 Cross Roads
Primary, Secondary 1, 2, 3, 4, 5
Auto
One-Way 2 Cross 1 Side
Primary, Secondary 1, 2, 3, 4, 5, 6
Auto
One-Way 2 Cross 2 Side
Primary, Secondary 1, 2, 3, 4, 5, 6, 7
Auto
Two-Way Zone (Manual Mode)
Primary, Secondary 1
Manual
Two-Way 1 Side
Primary, Secondary 1, 2
Auto
Two-Way 2 Side
Primary, Secondary 1, 2, 3
Auto
Two-Way 3 Side
Primary, Secondary 1, 2, 3, 4
Auto
Two-Way 4 Side
Primary, Secondary 1, 2, 3, 4, 5
Auto
Two-Way 1 Cross Road
Primary, Secondary 1, 2, 3
Auto/Manual
Two-Way 2 Cross Roads
Primary, Secondary 1, 2, 3, 4, 5
Auto
Disclaimer
Please consult the presiding traf
fi
c control manual to ensure proper work zone setup.
The following illustrations are not drawn to scale and are meant to be used as a
guide in determining the proper setup of the signals. In no way do these illustrations
re
fl
ect the appropriate signal setup for all work zones. Signal position and timing
should be approved by the presiding authority or project engineer prior to use.
