7
S
ECTION
3
• High gain omni-directional antenna (standard on every trailer).
4.
Diagonal Mast Arm Support
• the square, aluminum arm that connects the Horizontal Mast Arm to the Main Light Post.
5.
Main Light Post
• the round, aluminum post. When deployed, this post sits in the vertical position.
6.
Solar Array
• The solar panels supplied with every PTL 2.4x unit provides 400 Watts of power and are housed in
an anodized aluminum frame.
• The solar energy is sent to the solar panel controller which then transfers the power to the battery
bank.
• The energy generated by the solar panel assists in extending the autonomy of the unit – not to
charge the batteries to their maximum capacity; a full charge is achieved by using the 40 Amp smart
charger.
7.
Power Supply
• Power is supplied by either twelve (12) or sixteen (16) – 6 Volt deep cycle batteries, in series-parallel
to generate 24 VDC.
• Batteries are charged using the 40 Amp smart charger (external plug provided near cabinet door
providing easy access for connection to a 120 VAC source).
• Batteries receive some assisted energy supplied by the solar array – for more information see: item
6.
Solar Array
above.
Note: For more detailed information pertaining to batteries, charger, and solar array, refer to S
ECTION
13
P
OWER
S
YSTEM
I
NFORMATION
.
8.
Trailer Section Components
• The Trailer Section for the PTL 2.4x includes the following features:
◦
#10 Dexter torsion bar suspension axle
◦
ST205/75R15 tires
◦
Electric brakes
◦
Removable tongue with two (2) locking pins
◦
Four
fl
at-mount screw jacks to level and stabilize
◦
All electrical and lighting requirements for highway driving
◦
2” Hitch Ball Coupler on tongue; 2” Ball Hitch mounted on rear frame for tandem towing
• The frame structure and all supports are welded and inspected by certi
fi
ed welders, implemented
under ISO 9001:2015 guidelines.
• Approved for use on highways.