35
S
ECTION
8
9.
Phase Settings Chart
- the area used to input timing parameters and settings for all phases.
• The hard arrow buttons will move the selection box around the screen.
• Pressing ENTER will open the highlighted parameter for editing.
• Moving the selection box through the phase columns chart will cause the associated phase in the
NEMA phase diagram to be highlighted accordingly.
• Pressing ENTER on the PHASE number in the phase settings chart will bring up further editing options.
This includes APPLY VEHICLE MOVEMENT, ASSIGN UNITS, and ASSIGN BARRIER.
• The selection box can be moved up to the TIME OF DAY tabs to edit DAYS OF THE WEEK and START
TIME.
• More phase settings options can be found by moving the selection cursor down in the phase settings
chart.
• Plans will automatically be saved when exiting the Phase Settings screen or moving from one plan to
another.
8.2
NEMA D
A NEMA Phase Diagram is an industry standard for traf
fi
c control diagrams. Below is a diagram along
with labeled parts, as it appears on the GEN 3 controller.
1
2
3
4
5
6
7
8
FEB/01/17 09:53AM
BATTERY:
24.0 VOLTS
PRI-A
FEB/01/17 09:53AM
HOME > WZ SETUP >
PHASE SETTINGS
A
B
PRI-B
1
2
3
4
1. Phase currently selected for editing
2. Assigned Unit(s) and signal head(s) to the phase
3. Applied Vehicle Movement
4. Barriers Applied
BACK
ENTER
