manualshive.com logo in svg

Nortel Optical Multiservice Edge 6130, Planning Manual, Page: 78 / 292

Share
Download
Nortel Optical Multiservice Edge 6130 Planning Manual Download Page 78

6-18 

  OAM&P description

Optical Multiservice Edge 6130    NT6Q92MA   Rel 1.0   Iss 1  Standard  September 2006

Traffic Protection application

The user performs provisioning of traffic protection by selecting the 

MSP 

groups 

application in the 

Configuration

 main menu of the local craft access 

terminal. The protection provisioning application displays the protection 
provisioning data and allows the user to perform the following actions:

•

view the protection switch scheme and protection switch mode for the 
STM-1/4 interfaces

•

change the protection scheme from 1+1 MSP to unprotected for the 
STM-1/4 interfaces. This operation can be performed only when no 
connection is provisioned on the 1+1 MSP protection group.

•

change the protection scheme from unprotected to 1+1 MSP for the 
STM-1/4 interfaces. This operation can be performed only when no 
connection is provisioned on the ports that will be used in 1+1 MSP 
protection group.

•

change the protection switching mode from unidirectional (1WAY) to 
bidirectional (2WAY) and vice versa for the STM-1/4 interfaces of the 1+1 
MSP protection group

•

operate or release a user-initiated switch request on the 1+1 MSP group for 
the STM-1/4 interfaces

The SNCP protection configuration is provisioned upon creation of the nodal 
cross-connect or the VC association for Ethernet services. For more details on 
the local craft access terminal applications used to provision SNCP traffic 
protection, refer to 

Connection management application on page 6-15

Note:  

The default traffic protection mode on the OME6130 network 

element is unprotected.

1+1 MSP traffic protection

1+1 MSPtraffic protection is supported for the STM-1/4 interfaces to provide 
line traffic protection. 1+1 MSP traffic protection uses the 1+1 MSP protocol 
to handshake between adjacent network elements to determine when a 
protection switch should occur. All of the paths within the line are protected 
together.

Provisioning MSP protected connections

The user performs protection group provisioning from the 

MSP groups 

application in the 

Configuration

 main menu

 

of the local craft access terminal. 

The user creates the 

1+1MSP 

protection group for the STM-1/4 interfaces 

located on the 2x155/622M aggregate circuit pack or the 2x155M tributary 
circuit packs.

The working and protection ports of the 1+1 MSP traffic protection group must 
be provisioned on the same slot (i.e. slot 6 ports 1 and 2) for the STM-1/4 
interfaces of the 2x155/622M aggregate circuit pack.

Summary of Contents for Optical Multiservice Edge 6130





































































































































































































































































































Reviews:

No comments