Nortel Optical Multiservice Edge 6130, Planning Manual, Page: 132 / 292

7-30 Technical specifications
Optical Multiservice Edge 6130 NT6Q92MA Rel 1.0 Iss 1 Standard September 2006
Table 7-27 lists the optical specifications for the STM-1 (100Base)
Bidirectional SFPs.
Table 7-27
Optical specifications for STM-1 (100Base) Bidirectional SFPs
Classification 100Base
BX10-U
(see
Note 3 )
100Base
BX10-D
(see
Note 3 )
PEC NTTP09BD NTTP10BD
Transmitter
Transmitter type FP laser FP laser
Nominal wavelength 1310 nm 1530 nm
Transmit output power (max) -8 dBm -8 dBm
Transmit output power (min) -14 dBm -14 dBm
Spectral width 7.7 nm (RMS) 4.4 nm (RMS)
Minimum extinction ratio 6.6 dB 6.6 dB
Receiver
Receiver type PIN photodiode PIN photodiode
Wavelength range 1480 nm to
1580 nm 1260 nm to
1360 nm
Nominal wavelength 1530 nm 1310 nm
Receiver sensitivity -28.2 dBm -28.2 dBm
Receiver overload - 8 dBm - 8 dBm
Path penalty 4.5 dB 4.5 dB
Maximum receive reflectance -12 dB -12 dB
Optical path
Reach 10 km
(see
Note 2 )
10 km
(see
Note 2 )
Note 1:
All parameter values in the above table achieve an optical system BER better than 1x10
-12
.
Note 2: 0.5 m to 10 km over G.652 SMF.
Note 3:
Used for a bidirectional link over a single fiber with an upstream SFP fitted at one end of the
link and an downstream SFP fitted at the other end of the link. The upstream SFP transmits at 1310 nm
and receives at 1530 nm, the downstream SFP transmits at 1530 nm and receives at 1310 nm.