5-2
User interface description
Optical Multiservice Edge 6130 NT6Q92MA Rel 1.0 Iss 1 Standard September 2006
The local craft access terminal provides support for the following functions:
•
fault and alarm management
•
equipment and facility management
•
PM viewing and threshold setting
•
synchronization management
•
upgrades and software download
•
backup and restore
•
protection status and control
•
nodal security management
•
nodal connection management
•
DCN communications management
Refer to
for more information about the
operations, administration, maintenance and provisioning (OAM&P)
capabilities supported by the OME6130 Release 1.0.
For more information on the Local Craft Access Terminal and the supported
applications, refer to the
Local Craft Access User Guide
, 323-1855-195.
SNMP traps
The OME6130 supports autonomous forwarding of system events through
SNMP traps for consolidated alarm reporting. The SNMP traps are sent to an
SNMP manager, such as HP Open View, where they can be used to alert a
system operator.
Up to eight SNMP trap managers can be provisioned for each OME6130
network element. For each trap destination, the IP address and the SNMP
version (v1 or v2) are provisioned.
For more information on how to provision the SNMP trap destinations, refer
to
Provisioning and Protection Switching Procedures
, 323-1855-310.
Summary of Contents for Optical Multiservice Edge 6130
Page 291: ......